Asus GigaX2124X/C - Manual (Page 82)

GigaX Series L2 Managed Switch User’s Guide
82
CLI command : snmp community set
Community entry (table index): <entry id to config>
Community string (old community string): <new community string>
This action will modify all hosts with community string from 'old community'
to 'new community'.
Are you sure? (y/n):[y] <y for ‘yes’; n for ‘no’>
Get privileges: [y, always turn on by default]
Set privileges? (y/n):[n] <set privilege, y for ‘yes’; n for ‘no’>
Allows user to delete a community entry from community table.
CLI command : snmp community delete
Community entry (table index): <entry id to delete>
This action will delete all hosts in community string with 'delete
community'.
Are you sure? (y/n):[y] <y for ‘yes’; n for ‘no’>
[Reload]
Restores the previous saved settings from configuration file.
CLI command : snmp community retrieve
[Host IP Address] [Community]
A host entry contains a host IP address, network mask and its dedicated
community string.
CLI command : snmp host add
Host IP/Subnet: <IP address>
Netmask: <netmask>
Community: <community string>