Asus AP2300 - Manual (Page 35)

35
4. Hardware Setup
4. Hardware Setup
AP2300 Hardware Reference Guide
• 4-16 Redundant Power Supply
Power Supply Components
The redundant power supply consists of two identical ATX power modules.
The LED indicators light when both the input and output voltages are stable,
and dim when either the input or output voltage fails. A button located on
the bottom-right corner of the power supply disables the sounding of the
audible alarm.
Power Module Rating
The power modules are rated at 300W each and have passive current shar-
ing on all outputs. Each power module supplies up to 300W to share the
load but two modules combined do not provide 600W. If one power mod-
ule fails, 300W load is supported using one power module.
Redundant Power Supply
Power Button
Input Voltage
Selection Switch
AC Power In
Connector
Alarm Reset
Button
Power Supply
Status LED
IMPORTANT
Before turning on the server, make sure the power input voltage
is set to comply with the standard used in your country (220V-
240V or 110-120V).
NOTE
An optional 400W standard power supply module may be or-
dered on demand.