Asus P9D-MH/SAS/10G-DUAL - Manual (Page 148)

6-6 Chapter 6: Driver installation
8. Select YES from the following warning message then press <Enter>.
WARNING !!!
NO YES
)
DO YOU WANT TO CONTINUE ?
ALL DATA ON THE FLOPPY DISKETTE WILL BE DELETED !!
9. On the following Important message, select YES if an ASMB7 is installed, otherwise
select NO, then press <Enter>.
NO YES YES
<Important>
Please ensure ASMB7-iKVM is well installed on the
motherboard.
10. Insert the formatted diskette into the disk drive and press <Enter> to write the image to
the disk.
11. Press any key to continue when prompted.
The Create Driver Diskette Menu appears after the creation of the diskette is finished.
To create a RAID driver disk in Windows ® environment
1. Start Windows ® .
2. Place the motherboard support DVD into the optical drive.
3. Go to the Make disk menu, and then select the type of RAID driver disk you want to
create.
4. Insert a floppy disk into the USB floppy disk drive.
5. Follow succeeding screen instructions to complete the process.
Write-protect the floppy disk to avoid computer virus infection.
To create a RAID driver disk in Red Hat ® Enterprise Linux server environment
1. Insert a blank formatted high-density floppy disk to the USB floppy disk drive.
2. Type dd if=XXX.img of=/dev/fd0 to decompress the file into the floppy disk from
the following path in the support DVD:
For LSI MegaRAID Driver
\Drivers\C20x LSI RAID\Driver\makedisk\Linux
3. Eject the floppy disk.