Asus G60Jx - Manual (Page 85)

Notebook PC User Manual A-5
Security Setting
To set the administrator and user password:
1. On the Security screen, select Setup Administrator Password.
2. Type in a password and press [Enter].
3. Re-type to confirm the password and press [Enter].
4. Password is then set.
5. Repeat the previous steps to set the user password.
Set User Password is only available after you have set the
administrator password.
To clear the password:
1. On the Security screen, select Setup Administrator Password
or Set User Password.
2. Enter the current password and press [Enter].
3. Leave the Create New Password field blank and press [Enter].
4. Leave the Confirm New Password field blank and press [Enter].
5. Password is then cleared.
: Select Screen
: Select Item
Enter: Select
+/—: Change Opt.
F1: General Help
F2: Previous Values
F9: Optimized Defaults
F10: Save ESC: Exit
Version 1.28.1119. Copyright (C) 2008 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2008 American Megatrends, Inc.
Main
Advanced Main Advanced Security Boot Save & Exit
Password Description
After the Administrator’s password is set, the User password
can be set. Password is not case-sensitive.
The Administrator has full right in Setup, but the User only
has limited right in Setup.
The PasswordCheck is used to ask the password when entering
Setup and OS (Always) or just entering Setup (Setup).
Setup administrator password
Administrator Password :
NOT INSTALLED
User Password : NOT INSTALLED
I/O Interface Security
HDD Security Configuration:
HDD 0:Hitachi HTS5
Set the system boot order.