Xoro HTC 1926D - Manual (Page 82)

20
Engl
ish
Connection
Component Y Pb Pr Video– and Stereo Audio input
If you uses more than one multimedia termi-
nals and the SCART, HDMI and S-Video con-
nection are used, than you connect the next
device by the audio/video component input (Y
Pb Pr). Please connect the wire of an 3-pin
component cable with the YPbPr input of the
HTC TV set and the multimedia device. Please
pay attention to the coloured coding of the
cable, inputs jacks (LCD set) and the video
output jacks (source):
•
“Y” with the green wire or RCA plug
•
“Pb” with the blue wire or RCA plug
•
“Pr” with the red wire or RCA plug
With this kind of connection only video signals are transmitted. For listening sound on the TV
you should establish also a sound connection. Please connect the white and red wire of the
2-pin component cable with the AUDIO OUT (source) and the stereo jack with the “AUDIO”
plug of the HTC TV set.
Please press the SOURCE button and choose „YUV“ in the popup window. The YUV input is
active.
Note:
The Audio-adapter cable (RCA to stereo jack) is not part of the accessories.
S-Video Video- und Stereo Audio input
If you uses more than one multimedia terminals and the SCART, HDMI and AV connection
are used, than you connect the next device by the S-Video.
Please connect the S-Video cable with the S-VIDEO input
of the HTC TV set and with the S-Video output of the multi-
media device. With this kind of connection only video sig-
nals are transmitted. For listening sound on the TV you
should establish also a sound connection.
Please connect the white and red wire of the 2-pin compo-
nent cable with the AUDIO OUT (source) and the stereo
jack with the “AUDIO” plug of the HTC TV set.
Please press the SOURCE button and choose „S-Video“ in
the popup window. The S-Video input is active.
Note:
The Audio-adapter cable (RCA to stereo jack) is not part of
the accessories.