Xoro HTC 1926D - Manual (Page 83)

21
Engl
ish
Connection
VGA
You can use the HTC TV set as a PC moni-
tor by using the VGA interface. Please con-
nect a VGA cable with the VGA input of the
HTC TV set and with the PC.
With this kind of connection only video sig-
nals are transmitted. For listening sound on
the TV you should establish also a sound
connection. Please connect the white and
red wire of the 2-pin component cable with
the AUDIO OUT (source) and the stereo jack
with the “AUDIO” plug of the HTC TV set.
Please press the SOURCE button and
choose „VGA“ in the popup window. The
VGA input is active.
Notes:
1.
Before you connect the HTC TV set with the PC, please change the graphic resolu-
tion of the PC to: 640 x 480, 800 x 600 or 1024 x 768.
2. Please establish the connection and switch to „PC-VGA“ input.
3. For displaying the best results, please uses the native resolution of the TV LCD
panel:
•
HTC 1526d —> 1366 x 768 Pixel
•
HTC 1926d —> 1440 x 900 Pixel
•
HTC 2226d —> 1366 x 768 Pixel
Service Port
The service port is only for installing new firmware version (upgrade) for the TV part.
Note:
This USB port can not be used to connect USB-Sticks for playback of audio or video content.
Please connect the USB-Stick with the USB port on the right side.