Asus WL-100gDeluxe - Manual (Page 29)

ASUS WLAN Card 29
Chapter 3 - Reference
Chapter 3
Windows Settings
Click Apply to save and activate the new configurations.
Channel
Use the Channel field to select the radio channel for WLAN Card. In an
"infrastructure" network, your WLAN Card will automatically select the correct
frequency channel required to communicate with an Access Point, this parameter
will be fixed in "Auto" and cannot be changed. In an "Ad Hoc" network, you
can decide the channel number for the WLAN Card. Any WLAN Card can
communicate in the same network if they have the same frequency channel
setting.
The radio channels you may use depend on the regulations in your country. For
United States (FCC) and Canada (IC), channels 1 to 11 are supported. For
Europe (ETSI), channels 1 to 13 are supported. For operation in Japan (MKK),
channels 1 to 14 are supported.
Data Rate
Select the transmit data rate (fix or auto). The data rates supported for the
WLAN Cards are:
Auto – The adapter will adjust to the most suitable transmission rate.
Fix – 11g: Fix data rate to 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, or 54 Mbps.
11b: Fix data rate to 1, 2, 5.5, or 11 megabits per second.
Others
Encryption – Click on this to show the "Encryption" tab.
Advanced – Click on this to show the "Advanced" tab. In most cases, the
default values do not have to be changed.
Troubleshooting – Click on this to show the Troubleshooting utility.