Asus PIKE 1064E - Manual (Page 34)

3-4 第三章：安裝驅動程序
3.1.2 Windows ® Server 2003 操作系統
在 Windows ® Server 2003 操作系統安裝過程中
請依照以下步驟在 Windows ® Server 2003 操作系統安裝過程中安裝 RAID
卡驅動程序：
1. 用 Windows
® Server 2003 操作系統安裝光盤啟動系統。然後就會進入
Windows 2003 Setup 安裝畫面。
2. 當出現“Press F6 if you need to install a third party SCSI or RAID
driver...”的信息時，請按下 <F6> 鍵。
3. 當出現對話框時，請按下 <S> 鍵來指定一個額外的設備。
Windows Setup
S=Specify Additional Device ENTER=Continue F3=Exit
Setup could not determine the type of one or more mass storage devices
installed in your system, or you have chosen to manually specify an adapter.
Currently, Setup will load support for the following mass storage
devices(s):
<none>
* To specify additional SCSI adapters, CD-ROM drives, or special
disk controllers for use with Windows, including those for
which you have a device support disk from a mass storage device
manufacturer, press S.
* If you do not have any device support disks from a mass storage
device manufacturer, or do not want to specify additional
mass storage devices for use with Windows, press ENTER.
Windows Setup
Press F6 if you need to install a third party SCSI or RAID driver...