Asus RS520-X5/PS8 - Manual (Page 80)

5-22 Chapter 5: BIOS setup
F1 Help ↑↓ Select Item -/+ Change Values F9 Setup Defaults
ESC Exit →← Select Menu Enter Select Sub-Menu F10 Save and Exit
Item Specific Help
Select ‘Yes’ if you
want to clear the
Extended System
Configuration
Data (ESCD) area.
PCI Configuration
Reset Configuration Data: [No]
Plug & Play OS [No]
Palette Snooping [Disabled]
PCIEX1 Slot
PCIEX2 Slot
PCI3 Slot
PCIE4 Slot
PCIE5 Slot
PhoenixBIOS Setup Utility
Advanced
5.4.3 PCI Configuration
This menu shows the PCI configuration settings. Select an item then press <Enter>
to display the configuration options.
Reset Configuration Data [No]
This item allows you to clear the Extended System Configuration Data (ESCD)
area. Configuration options: [No] [Yes]
Plug & Play O/S [No]
When set to [No], BIOS configures all the devices in the system. When set to
[Yes] and if you install a Plug and Play operating system, the operating system
configures the Plug and Play devices not required for boot.
Configuration options: [No] [Yes]
Palette Snooping [Disabled]
When set to [Enabled], the palette snooping feature informs the PCI devices that
an ISA graphics device is installed in the system so that the latter can function
correctly. Configuration options: [Disabled] [Enabled]
PCIX1-2 Slot; PCI3 Slot; PCIE4-5 Slot
Allows you to configure the specific PCI devices.
Item Specific Help
Initialize device
expansion ROM
PCIX1 Slot
Option ROM Scan: [Enabled]
PhoenixBIOS Setup Utility
Advanced
Option ROM Scan [Enabled]
Allows you to enable or disable the device expansion ROM.
Configuration options: [Enabled] [Disabled]