5 connecting the intel® asrk1 module (optional), Connecting the intel, Asrk1 module (optional) -19 – Asus Z9PH-D16 User Manual
Page 37: 5 connecting the intel, Asrk1 module (optional), Upgrade kit table for intel scu
ASUS Z9PH-D16, Z9PH-D16/FDR
2-19
2.5.5
Connecting the Intel
®
ASRK1 Module (Optional)
Follow the steps below to connect the ASRK1 Module to the connector on your
motherboard.
1. Locate the ASRK connector on the
motherboard.
2. Connect the ASRK1 module to the
connector.
Changing the module for different RAID settings:
1. Power off the system and disengage the original module.
2. Reboot the system to enter OS.
3. After the system successfully enters the OS, power off again.
4. Put the intended module in place and reboot the system.
5. The system will automatically detect the different RAID settings.
For detail of Intel
®
Rapid Storage Technology utility, please refer to Chapter 6
RAID Configuration.
Protocol Enabled
Ports
Intel RSTe SAS RAID 5
W/O ASRK
SATA (3Gb/s)
4 ports
SATA RAID 5
ASRK #1
SATA/SAS (3Gb/s)
4 ports
No
ASRK #2
SATA/SAS (3Gb/s)
4 ports
Yes
Upgrade Kit table for Intel SCU
ASRK module support ASRK#1 and #2 only.