Asus Z9PH-D16 - Manual (Page 80)

4-22 Chapter 4: BIOS setup
4.4.5 PCH SCU SAS Configuration
The PCH SCU SAS configuration items appears only when you installed the
ASRK Module (optional) on the motherboard. This menu automatically detects and
displays the Device 1-4.
Intel
® RSTe SATA RAID 5 support requires additional BIOS setting with below two
kinds of H/W configuration. The user can set [SATA only RAID5] as enabled to
have RAID 5 supported with SATA hard drives, but the SAS hard drive cannot be
supported when this function is enabled.
Here are the two kinds of H/W configuration mentioned above:
1.The PCH of the motherboard is hard SKU –B or –D.
or
2.The PCH of the motherboard is hard SKU –A with ASRK #1 or ASRK #5 enabled.
Patsburg B/D sku only Device1 Not Present
Device2 Not Present
Device3 Not Present
Device4 Not Present
Sata only RAID5 [Disabled]
→←: Select Screen
↑↓: Select Item
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.