Asus PIKE 6480 - Manual (Page 15)

ASUS PIKE 6480 2-3
2.2 Marvell ® 88SE6480 SAS RAID BIOS
setup utility
The Marvell ® 88SE6480 SAS RAID BIOS setup utility allows you to create
RAID 0, 1, 10 ,and 5 set(s) from SAS hard disk drives that are connected to the
PIKE 6480 SAS RAID card.
• DO NOT combine Serial ATA and SAS disk drives in one volume.
• The RAID setup screens shown in this section are for reference only and
may not exactly match the items on your screen due to the controller
version difference.
To enter the Marvell ® RAID BIOS setup utility:
1. Turn on the system after installing all SAS hard disk drives.
2. During POST, press <Ctrl> + <M> to enter the utility main menu.
The RAID BIOS setup screens shown in this section are for reference only and
may not exactly match the items on your screen.
4. Press <Enter> and select a desired adapter for RAID configuration.
Marvell BIOS Setup (c) 2008 Marvell Technology Group Ltd.
ENTER/SPACE:Select, ESC:Back/Exit
VendorID:DeviceID: 11AB:6480
BIOS Version: 3.1.0.18
PCI Slot: 00
Adapter Serial Number: VA2400WWXX0000000005
IRQ Number: 0E
Raid Mode: RAID0 RAID1 RAID10 RAID5
Port 0 SAS Address: 5005043011AB0028
Port 1 SAS Address: 5005043011AB0029
Port 2 SAS Address: 5005043011AB002A
Port 3 SAS Address: 5005043011AB002B
Port 4 SAS Address: 5005043011AB002C
Port 5 SAS Address: 5005043011AB002D
Port 6 SAS Address: 5005043011AB002E
Port 7 SAS Address: 5005043011AB002F
[Selection] [Controller] [ Devices ] [ RAID ]
Adapter 0
Select Adapter
Adapter 0
Marvell BIOS Setup (c) 2008 Marvell Technology Group Ltd.
ENTER/SPACE:Select, ESC:Back/Exit
[Selection] [Controller] [ Devices ] [ RAID ]