Asus PIKE 6480 - Manual (Page 29)

ASUS PIKE 6480 3-5
4. Insert the RAID driver disk you created earlier to the floppy disk drive, then
press <Enter>.
Windows Setup
ENTER=Continue ESC=Cancel F3=Exit
Please insert the disk labeled
Manufacturer-supplied hardware support disk
into Drive A:
* Press ENTER when ready.
5. Select the RAID controller driver from the list, then press <Enter>.
6. The Windows ® Setup loads the RAID card drivers from the RAID driver disk.
When next screen appears, press <Enter> to continue installation.
7. Setup then proceeds with the OS installation. Follow screen instructions to
continue.
Windows Setup
ENTER=Select F3=Exit
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
Marvell 64xx/63xx SAS Controller 32bit Driver
Marvell 64xx/63xx SAS Controller 64bit Driver