Asus AP140R-E1 - Manual (Page 45)

4-3 ASUS AP140R-E1 1U barebone server
Layout contents
Jumpers
1. Keyboard power (3-pin KBPWR1) 4-4
2. Gigabit LAN1 controller setting (3-pin LAN_EN1) 4-4
3. Gigabit LAN2 controller setting (3-pin LAN_EN2) 4-5
4. Onboard VGA setting (3-pin VGA_EN1) 4-5
5. Recovery setting (3-pin RECOVERY1) 4-6
6. Clear RTC RAM (3-pin CLRTC1) 4-7
Internal connectors
1. Floppy disk drive connector (34-1 pin FLOPPY1) 4-8
2. SMBus connector (6-1 pin BPSMB1) 4-8
3. IDE connectors (40-1 pin PRI_IDE [blue], SEC_IDE [black]) 4-9
4. Serial ATA connectors (7-pin SATA1, SATA2) 4-10
5. ATX power connectors (20-pin, 4-pin) 4-11
6. LED connector (2-pin J3) 4-11
7. Fan connectors (3-pin FAN1/2/3/4/5/6) 4-12
8. Chassis intrusion connector (4-1 pin CHASSIS1) 4-12
9. USB header (10-1 pin USB34) 4-13
10. System panel connector (20-1 pin PANEL1) 4-13
- LAN connection indicators (2-pin LAN1_LED, LAN2_LED) 4-14
- Hard disk activity LED (2-pin IDE_LED) 4-14
- Front panel location LED (2-pin FP_LOCLED) 4-14
- System power LED (2-pin PWR_LED) 4-14
- Reset switch (2-pin RESET) 4-14
- ATX power button/ Soft-off switch (2-pin PWRBTN) 4-14
- Message LED (2-pin MSG_LED) 4-14
- Front panel location switch (2-pin FP_LOCSW) 4-14