Asus RS704D-E6/PS8 User Manual
Page 38
Advertising
Chapter 2: Hardware setup
2-18
5. Align and insert the golden fingers
of the PIKE SAS RAID card into
the card slot on the PIKE raiser
card. Ensure the card is completely
seated on the slot.
6. For PIKE 1078 SAS RAID card,
snap the i Button into the i Button
slot on the PIKE raiser card.
7. Connect the SGPIO cable (pre-
installed to the barebone server) to
the SGPIO connector on the PIKE
Riser card.
8. Remove the SATA/SAS cables from
the onboard SATA1–4 connectors.
Advertising