Asus RS704D-E6/PS8 User Manual
Page 39
Advertising
2-19
ASUS RS700D-E6/PS8, RS702D-E6/PS8, RS704D-E6/PS8
9. Connect the SATA/SAS cables
to the SAS1–4 connectors on the
PIKE riser card.
10. Align the riser card bracket to
the PCI Express x16 slot on the
motherboard.
11. Press the riser card bracket until
the golden fingers completely fit the
slot and the bracket aligns with the
rear panel.
12. Temporarily remove the two system
fans in front of the center mylar.
13. Move the SGPSEL1 jumper on the
SATA/SAS backplane to 2–3. If you
install two PIKE riser cards in the
chassis, move both the jumpers.
14. Place the two system fans back to
their default positions.
Advertising