Asus RS700-E7/RS8 User Manual
Page 33
Advertising
2-15
ASUS RS700-E7/RS8
6. Push the tray lever until it clicks,
and secures the drive tray in place.
The drive tray is correctly placed
when its front edge aligns with the
bay edge.
5. Carefully insert the drive tray and push it all the way to the depth of the bay
until just a small fraction of the tray edge protrudes.
When installed, the SATAII/SAS connector on the drive connects to the SATAII/
SAS interface on the backplane.
4. Place a SATAII/SAS hard disk drive
on the tray, and then secure it with
four screws.
7. Repeat steps 1 to 6 if you wish to install a second SATAII/SAS drive.
Advertising