Asus Z8PE-D18 - Manual (Page 146)

6-12 Chapter 6: Driver installation
6.1.4 SUSE Linux Enterprise Server OS
To install the RAID controller driver when installing SUSE Linux Enterprise Server
OS:
1. Boot the system from the SUSE OS installation CD.
2. At the Boot Options, type linux dd noprobe=ata1 noprobe=ata2....
The number of ata varies with the hard disk drive number you have when
building a RAID set. For example, if you want to build a RAID set with 6 hard
disk drives, type command line: linux dd noprobe=ata1 noprobe=ata2
noprobe=ata3 noprobe=ata4 noprobe=ata5 noprobe=ata6.
3. Use the arrow keys to select Installation from the Boot Options menu.
F1 Help F2 Language F3 1280 x 1024 F4 DVD F5 Driver
Boot from Hard Disk
Installation
Installation--ACPI Disabled
Installation--Local APIC Disabled
Installation--Safe Settings
Rescue System
Memory Test
Boot Options |
4. Press <F5>, then select Yes from the menu. Press <Enter>.
F1 Help F2 Language F3 1280 x 1024 F4 DVD F5 Driver
Boot from Hard Disk
Installation
Installation--ACPI Disabled
Installation--Local APIC Disabled
Installation--Safe Settings
Rescue System
Memory Test
Boot Options | Yes
No
File