10 chapter 5: raid configuration – Asus KFSN4-DRE/SAS User Manual
Page 104
![background image](/manuals/302474/104/background.png)
5-10
Chapter 5: RAID configuration
4. The Adapter Properties screen appears.
Use the arrow keys to select RAID Properties, then press <Enter>.
5. The Select New Array Type screen apprears.
Use the arrow keys to select Create IM Volume, then press <Enter>.
3. The following screen appears. Select a channel and press <Enter> to enter
the setup.
The numbers of the channel depend on the controller.
Esc = Exit Menu F1/Shift+1 = Help
Alt+N = Global Properties -/+ = Alter Boot Order Ins/Del = Alter Boot List
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
Adapter List
Global Properties
Adapter PCI PCI PCI PCI FW Revision Status Boot
BUS Dev Fnc Slot Order
SAS1064E
04 03 00 00 1.22.01.00-IR Enabled
0
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+ = Change Item
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
Adapter Properties -- SAS1064E
Adapter SAS1064E
PCI Slot 00
PCI Address(Bus/Dev/Func) 04:00:00
MPT Firmware Revision 1.22.01.00-IR
SAS Address 500E0101:23456712
NVDATA Version 2B.00
Status Enabled
Boot Order 0
Boot Support (Enabled BIOS & OS)
RAID Properties
SAS Topology
Advanced Adapter Properties
Esc = Exit Menu F1/Shift+1 = Help
Enter = Choose array type to create
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
Select New Array Type -- SAS1064E
Create IM Volume
Create Integrated Mirror Array of 2
disks plus up to 2 optional hot spares.
Data on the primary disk may be migrated.
Create IME Volume
Create Integrated Mirrored Enhanced
Array of 3 to 10 disks including up
to 2 optional hot spares.
ALL DATA
on array disks will be DELETED!
Create IS Volume
Create Integrated Striping array of
2 to 10 disks.
ALL DATA
on array disks will be DELETED!