Asus Z8NA-D6 - Manual (Page 43)

ASUS Z8NA-D6 Series 2-23
2.5.13 Connect Thermal sensor cable
Follow the steps below to connect the optional thermal sensor cable to the
connector on your motherboard.
1. Locate the TR1 or TR2 connector on
the motherboard.
2. Connect the thermal sensor cable to
the connector.
3. Place the other end of the thermal sensor cable to the device you would like
to monitor temperature.
2.5.12 Installing the audio card
1. Locate the audio slot on the
motherboard.
2. Align the card connector with the slot
and press firmly until the card sits on
the slot completely.
This slot does not support PCI-E x1 cards.