16 chapter 5: raid configuration – Asus P7F-C/SAS User Manual
Page 112
5-16
Chapter 5: RAID configuration
4.
The
Adapter Properties screen appears.
Use the arrow keys to select
RAID Properties, then press <Enter>.
3.
The following screen appears. Select a channel and press <Enter> to enter
the setup.
The numbers of the channel depend on the controller.
Esc = Exit Menu F1/Shift+1 = Help
Alt+N = Global Properties -/+ = Alter Boot Order Ins/Del = Alter Boot List
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
Adapter List
Global Properties
Adapter PCI PCI PCI PCI FW Revision Status Boot
BUS Dev Fnc Slot Order
SAS1068E
04 03 00 00 1.22.01.00-IR Enabled
0
Esc = Exit Menu F1/Shift+1 = Help
Enter = Select Item -/+ = Change Item
LSI Logic Config Utility v6.16.00.00 (2007.05.07)
Adapter Properties -- SAS1068E
Adapter SAS1068E
PCI Slot 00
PCI Address(Bus/Dev/Func) 04:00:00
MPT Firmware Revision 1.22.01.00-IR
SAS Address 500E0101:23456712
NVDATA Version 2B.00
Status Enabled
Boot Order 0
Boot Support (Enabled BIOS & OS)
RAID Properties
SAS Topology
Advanced Adapter Properties