Asus P7F-C/SAS User Manual
Page 146
Advertising
5-50
Chapter 5: RAID configuration
Using the Objects command
To check data consistency using the
Objects command
1.
From the
Management Menu, select Objects, and then select Virtual Drive
from the sub-menu.
2.
Use the arrow keys to select the virtual drive you want to check, and then
press <Enter>.
3.
Select
Check Consistency from the pop-up menu, and then press <Enter>.
4.
When prompted, use the arrow keys to select
Yes from the dialog box to
check the drive.
5.
When checking is complete, press any key to continue.
Advertising