Asus RS700-E7/RS4-C - Manual (Page 36)

Chapter 2: Hardware setup 2-18
3. Install a PCI Express x8 or x16
card to the bracket as shown, then
secure the card with a screw.
To reinstall the riser card bracket in PCIE2 slot:
1. Align the riser card bracket with the
cards to the PCI Express x16 slot
on the motherboard.
2. Press the riser card bracket until
the golden connectors completely
fit the slot and the bracket aligns
with the rear panel.
3. Connect the cable(s) to the card, if
applicable.