Asus RS700-E7/RS4-C - Manual (Page 54)

4-6 Chapter 4: Motherboard information
4. RAID configuration utility selection (3-pin RAID_SEL1)
This jumper allows you to select the RAID configuration utility to use when
you create disk arrays. Place the jumper caps over pins 1–2 if you want to
use the LSI MegaRAID software RAID Setup Utility (default); otherwise,
place the jumper caps to pins 2–3 to use the Intel ® Rapid Storage Technology
Enterprise.
®
Z9PP-D24
Z9PP-D24 RAID setting
2 1 2 3
LSI RAID
(Default)
INTEL
RAID_SEL1
PIN1 PIN1
®
Z9PP-D24
Z9PP-D24 ME_RCVR
ME_RCVR1
5. ME firmware force recovery setting (3-pin ME_RCVR1)
This jumper allows you to quickly recover the Intel Management Engine (ME)
firmware when it becomes corrupted.