Asus SL1000 - Manual (Page 70)

Chapter 9. Configuring Firewall/NAT Settings Internet Security Router User ’s Manual
54
Figure 9.9. Outbound ACL Configuration Page
9.4.1 Outbound ACL Rule Configuration Parameters
Table 9.2 describes the configuration parameters available for firewall outbound ACL rule.
Table 9.2. Outbound ACL Rule Configuration Parameters
Field Description
ID
Add New Click on this option to add a new 'basic' Firewall rule.
Rule Number Select a rule from the drop-down list, to modify its attributes.
Action
Allow Select this button to configure the rule as an allow rule.
This rule when bound to the Firewall will allow matching packets to pass
through.
Deny Select this button to configure the rule as a deny rule.
This rule when bound to the Firewall will not allow matching packets to
pass through.
Mave to
This option allows you to set a priority for this rule. The Internet Security Router Firewall acts on
packets based on the priority of the rules. Set a priority by specifying a number for its position in the
list of rules:
1 (First) This number marks the highest priority.
Other numbers Select other numbers to indicate the priority you wish to assign to the rule.
Source IP
This option allows you to set the source network to which this rule should apply. Use the drop-down
list to select one of the following options:
Any This option allows you to apply this rule to all the computers in the local