Asus SL1000 - Manual (Page 89)

Internet Security Router User ’s Manual Chapter 9. Configuring Firewall/NAT Settings
73
Figure 9.24. Modify an Application Filter
9.7.1.5 Delete an Application Filter
To delete an Application Filter, click on the icon of the filter to be deleted or follow the instruction below:
1. Open the Application Filter Configuration page (see section 9.7.1.2Access Application Filter
Configuration Page – (Firewall è Policy List è Application Filter)).
2. Select the application filter to delete. Click on the icon of the application filter to be deleted in
the Application Filter List table or select the filter type from the Filter Type drop-down list and then
select the filter rule from the Filter Rule drop-down.
3. Click on the button to delete this filter.
9.7.2 Configuring IP Pool
9.7.2.1 IP Pool Configuration Parameters
Table 9.8 describes the configuration parameters available for an IP pool.
Table 9.8. IP Pool Configuration Parameters
Field Description
IP Pool Name Enter the name of the local IP
IP Pool Type Select the type of IP Pool.
IP Range This option allows you to configure the range of IP addresses.
Start IP Enter the starting IP address of the range.
End IP Enter the ending IP address of the range.
Subnet This option allows you to include all the computers that are connected in an
IP subnet.
Subnet Address Enter the appropriate IP address.
Subnet Mask Enter the corresponding mask.
IP Address This option allows you to configure single IP address.
Filter Type drop-down list
Filter Rule drop-
down list