Asus PIKE 2208 - Manual (Page 73)

ASUS PIKE 2208 3-5
4. Insert the RAID driver disk you created earlier to the floppy disk drive, then
press <Enter>.
Windows Setup
ENTER=Continue ESC=Cancel F3=Exit
Please insert the disk labeled
Manufacturer-supplied hardware support disk
into Drive A:
* Press ENTER when ready.
5. Select LSI MegaRAID SAS RAID Controller Driver (Server 2003), and then
press <Enter>.
6. The Windows ® Setup loads the RAID card drivers from the RAID driver disk.
When next screen appears, press <Enter> to continue installation.
7. Setup then proceeds with the OS installation. Follow screen instructions to
continue.
Windows Setup
ENTER=Select F3=Exit
You have chosen to configure a SCSI Adapter for use with Windows,
using a device support disk provided by an adapter manufacturer.
Select the SCSI Adapter you want from the following list, or press ESC
to return to the previous screen.
LSI MegaRAID SAS RAID Controller Driver (Windows 2000)
LSI MegaRAID SAS RAID Controller Driver (Server 2003 32-bit)