Asus PR-DLS - Manual (Page 127)

ASUS PR-DLS motherboard user guide 5-35
5.7.2 Intel ® 82551QM/82544GC LAN Driver
Installation
SCO UnixWare 7.1.1 system can correctly recognize Intel 82551 network
controller during installation. User doesn’t need to load or modify the
network driver for the onboard LAN device.
You can find the Intel 82551 Network driver from PR-DLS support CD at:
\Drivers\Lan\UNIX\UW7DDI8
It is not necessary, nor recommended, to remove previous versions of this
package from the system before installing this updated version. To install
this package, you may use the
scoadmin Application Installer from the
desktop, or as a root login with pkgadd command.
1. Copy the eeE8.pkg file into any directory on the UnixWare system,
such as in the /tmp directory.
2. Make sure no other users are logged on and all user applications are
closed.
3. If there is an older version of the eeE driver on the system, first run
‘ netcfg ’ and remove any configured NICs. Exit ‘ netcfg ’. Remove the
old driver by typing ‘ pkgrm eeE ’. (You can find the driver version by
typing ‘ pkginfo -l eeE ’).
4. Install the new driver using ‘pkgadd’. For example:
# pkgadd -d /tmp/eeE8.pkg
5. Run ‘ netcfg ’ to add and configure the NICs.
6. Reboot the system.
If you require Hot Plug PCI capabilities, the DDI 8 eeE8 driver must be
used. The DDI 8 driver is supported on UnixWare 7.1.0 and later
versions. For more information about Hot Plug PCI capabilities please
refer to SCO UnixWare 7 documentation.
5.7.3 ATI ® Rage XL Display Driver Installation
SCO UnixWare 7.1.1 system can correctly recognize ATI Rage XL graphic
controller (ATI MACH64) during installation. User doesn’t need to load or
modify the video driver for the onboard VGA device.