7 switches and jumpers, 1 switches, 2 jumpers – Asus PR-DLS User Manual
Page 40
Advertising
![background image](/manuals/303451/40/background.png)
2-14
Chapter 2: Hardware information
2.7
Switches and jumpers
2.7.1 Switches
The following figure shows the location and default settings of the DIP
switches on the motherboard.
1. SCSI setting (2-pin SCSI_EN)
This jumper allows you to enable or disable the onboard SCSI feature.
Keep the jumper open if you wish to install SCSI devices. Place a cap
on the jumper to disable the onboard SCSI controller.
PR-DLS
ON
OFF
PR-DLS DIP Switches
CLKSW
ON
1 2 3 4 5
(Default)
PR-DLS
SCSI_EN
PR-DLS SCSI Setting
(Default)
Enable
Disable
Keep the default settings for stable system operation.
2.7.2 Jumpers
Advertising
This manual is related to the following products: