Air Suspension C-2545 REV 9 - Manual (Page 3)

3 C-2545 REV 9 04/28/2014
4.0
Disconnect the air line by turning clip 90 ̊. Locate and disconnect ride height
sensor.
5.0
Remove the upper air shock nut and bolt.
6.0
Disconnect brake line bracket, which is bolted to the rear differential.
7.0
Support axle before disconnecting the sway bar end link.
8.0
Disconnect the sway bar end link.
9.0
Remove the lower shock nut and bolt .
10.0 Remove shock, (Install spring
’s before completing shock Install).
11.0
Removal complete, installation is in the reverse order of removal. Install upper
shock bolt, and allow shock to hang until spring installation is complete. Torque
upper shock bolt to manufacturer’s specification.
FIGURE B