Air Suspension C-2545 REV 9 User Manual

Page 4

Advertising
background image

4

C-2545 REV 9 04/28/2014

Coil Spring Installation:

1.0

Install the coil springs onto the rear axle.

2.0

Using a floor jack raise the rear axle.

3.0

Install the lower shock absorber retaining nut and bolt to the rear axle. Tighten

the lower shock absorber retaining n

ut and bolt to manufacturer’s specification.

4.0

Replace tire and wheel assembly. Tighten wheel lug nu

ts to manufacturer’s

specificaton.

5.0

Remove all safety stands and lower vehicle.

WARNING:

Make sure to tighten all wheel hub bolt nuts to manufacture’s

specification. Failure to heed to this warning could result in

vehicular

damage or serious bodily injury.






Advertising