Air Suspension C-2545 REV 9 User Manual
Page 5
5
C-2545 REV 9 04/28/2014
Front Shock Installation:
WARNING:
Before disassembling the front suspension refer to the vehicle
remanufacturer’s Service Manual for proper procedures. Failure to heed this warning could
result in vehicular damage or serious bodily injury.
PARTS LIST
P/N
QTY
DESCRIPTION
29- 5009
2
SHOCK ABSORBERS, FRONT
29- 5009
Removal:
1.0 Raise and support the vehicle.
2.0 If equipped with selectable ride, disconnect the Real Time Damping (RTD) link rod
from the sensor. Grasp the connector lock tabs. Rotate the connector lock tabs (1)
and (2) counter-clockwise until the connector is unlocked. Disengage the
connector from the tennon by firmly pulling the connector up. Hold the tennon end
with a wrench while removing the nut. Remove the nut. (FIGURE 10-2)
FIGURE B