Air Suspension C-2518 REV 2 - Manual (Page 15)

15 REV 2 06/03/2014 C-2518
C-2518
ARNOTT COil spRiNg CONVERsiON kiT
FOR 2003-2005
lAND ROVER RANgE ROVER
11. Using a Floor jacK, raise the lower control arM to realign with the spindle Being
sUre the spring is secUrelY seated. reinstall the lower control arM to spindle Bolt
Followed BY the reMaining sUspension Fasteners. (FigUre 40-11)
12. installation coMplete.
FigUre 40-11
FigUre 50-1
ELEctRoNIc bYPAss moDULE INstALLAtIoN
1. reMove the BottoM halF oF the center console containing the clocK. slide the straw
Under the BottoM corner oF the console. (FigUre 50-1)
2. gentlY liFt Up on the console on Both sides to eXpose the clocK’s wiring harness.
(FigUre 50-2)
FigUre 50-2