Air Suspension C-2518 REV 2 User Manual
Page 8
Advertising
8
REV
2
06/03/2014
C-2518
C-2518
ARNOTT COil spRiNg CONVERsiON kiT
FOR
2003-2005
lAND ROVER RANgE ROVER
fRoNt coIL stRUt AssEmbLY
1.
place the lower seat onto the shocK and Fasten with the 5/16-18 X 3/4” Bolt throUgh
the
alignMent hole in the shocK.
2.
install the spring, pigtail First, onto the strUt and locate in the lower seat.
3.
slide the dUst Boot and BUMp stop over the shaFt oF the shocK.
4.
place one oF the two spacer washers onto the strUt Followed BY the appropriate side
Upper MoUnt.
5.
Using a saFe and appropriate spring coMpressing Method, coMpress the spring Until
the threaded shaFt is protrUding throUgh the Upper MoUnt.
6.
install the reMaining spacer washer on top oF the MoUnt and secUre with the shocK
nUt.
Advertising