Air Suspension Front and Rear Coil Spring Conversion LINCOLN Mark VIII - Manual (Page 5)

10. Remove upper rear suspension arm and 11.Remove bolt from the bottom of the rear
bushing bolt and nuts. shock.
12. Rear suspension ready to install coil spring. 13. Install bottom spring seat in lower control arm.
Bolt the aluminum spring pilot in place.
14. Carefully install the new rear coil spring 15.Spay the top of the coil spring with a lubricant.
over the bottom spring pilot. Push the top of the coil spring in place. Make
sure the center Dow pin is in the correct hole.