AVSL Citronic CLA-1460 - Manual (Page 3)

171.220 User Manual
Introduction
Thank you for choosing the Citronic CLA-1460 active line array system. This self-contained unit can
operate independently or as part of a larger system to provide accurate, full-range sound
reproduction for applications as diverse as theatre, conference, live music venues and houses of
worship. Please read and follow the instructions in this manual to achieve the best results and avoid
damage through incorrect usage.
Description
The CLA-1460 is a self-contained active speaker system which combines an active 2 x 12” subwoofer
with a group of 4 arrayed mid-top cabinets. The power amplifier section is housed in the subwoofer
unit which, in turn, is linked to power the 4 mid-top cabinets. Each mid-top cabinet houses a pair of
6” low-mid drivers, single 6” high-mid driver and a precision ribbon tweeter for high frequencies and
is engineered to provide a focused vertical output with a very wide dispersion for maximum
horizontal coverage
The input signal is fed via a digitally controlled EQ and dynamics processor to maximize efficiency in
the system and enable frequency adjustment to tailor the output to suit the venue or application.
Connection to a PC gives access to the DSP processor using the supplied software CDROM, allowing
bespoke programming of the response and tone characteristics of the sub and array.
Various installation methods are possible with the custom-designed mounting/flying frame,
depending upon the building or surroundings and can be combined to provide modular arrays or
multi-point sound reinforcement for larger areas.
Components
Due to the size of the components, the CLA-1460 is supplied in 6 individual cartons
Please check that you have all 6 cartons and check the contents when opening the packaging.
If any components are missing or damaged, contact your dealer immediately.
The package should contain...

Cartons 1, 2, 3, and 4 are passive line-array mid-top cabinets

Carton 5 is the active subwoofer unit

Carton 6 is the mounting/flying frame
Also included should be the following

Packet of fixing hardware

PC Software CDROM

Mains lead

RS-232 cable

USB cable

4 x Speaker link leads