C2G 52041 TruLink VGA and PS_2 KVM User Manual
Page 7
6
• Position system cables and power cables carefully; Be
sure that nothing rests on any cables.
• When connecting or disconnecting power to hot
pluggable power supplies, observe the following
guidelines:
• If the system has multiple sources of power, disconnect
power from the system by unplugging all power cables
from the power supplies.
• Never push objects of any kind into or through cabinet
slots. They may touch dangerous voltage points or
short out parts resulting in a risk of fire or electrical
shock.
• Do not attempt to service the device yourself. Refer all
servicing to qualified service personnel. If the following
conditions occur, unplug the device from the wall outlet
and bring it to qualified service personnel for repair.
-The power cord or plug has become damaged or
frayed.
-Liquid has been spilled into the device.
-The device has been exposed to rain or water
-The device has been dropped, or the cabinet has been
damaged.
-The device exhibits a distinct change in performance,
indicating a need for service.
-The device does not operate normally when the
operating instructions are followed.
• Only adjust those controls that are covered in the
operating instructions. Improper adjustment of other
controls may result in damage that will require
extensive work by a qualified technician to repair.