Diodes UDZ5V1BF - Manual

UDZ5V1BF
Document number: DS32228 Rev. 5 - 2
1 of 4
www.diodes.com
August 2010
© Diodes Incorporated
UDZ5V1BF
NEW PROD
UC
T
0.5W SURFACE MOUNT PRECISION ZENER DIODE
Features
• 500mW Power Dissipation on FR-4 PCB
•
Very Tight Tolerance on V
Z
•
Low Reverse Leakage Current
•
Ideally Suited for Automated Assembly Processes
• Lead, Halogen and Antimony Free, RoHS Compliant (Note 2)
•
"Green" Device (Note 3)
Mechanical Data
• Case: SOD-323F
• Case Material: Molded Plastic, “Green Molding Compound”.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020
•
Terminal Connections: Cathode Band
•
Terminals: Finish - Matte Tin annealed over Copper Alloy
leadframe. Solderable per MIL-STD-202, Method 208
•
Marking Information: See Page 3
•
Ordering Information: See Page 3
• Weight: 0.01 grams (approximate)
Maximum Ratings
@T
A
= 25°C unless otherwise specified
Characteristic Symbol Value Unit
Forward Voltage @ I
F
= 10mA V
F
0.95 V
Thermal Characteristics
Characteristic Symbol Value Unit
Power Dissipation (Note 1) P
D
500 mW
Thermal Resistance, Junction to Ambient Air (Note 1) R θJA 200 °C/W
Operating and Storage Temperature Range T
J,
T
STG
-65 to +150 °C
Electrical Characteristics
@T
A
= 25°C unless otherwise specified
Type Number Marking Code
Zener Voltage Range
(Notes 4, 5)
Maximum Zener Impedance
(Note 6)
Maximum Reverse
Current (Note 7)
V
Z
@ I
ZT
I
ZT
Z
ZT
@ I
ZT
Z
ZK
@ I
ZK
I
ZK
I
R
@ V
R
Min (V) Max (V) mA Ω mA
μA
V
UDZ5V1BF GM 4.98 5.20 5 80 500 0.5 2 1.5
Notes: 1. Device mounted on FR-4 PCB with 10mm x 10mm pad, board size 35mm * 25mm.
2. No purposefully added lead. Halogen and Antimony Free.
3. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php.
4. The Zener voltage is measured 40ms after power is supplied.
5. For inquiries on alternate nominal zener voltages, please contact your Diodes Inc. sales representative for availability and minimum order details.
6. f = 1kHz.
7. Short duration pulse test used to minimize self-heating effect.
Top View