Zxld1320 – Diodes ZXLD1320 User Manual
Page 12
Advertising
ZXLD1320
© Zetex Semiconductors plc 2008
Fig 1
PWM control
A wider dimming range can be achieved by applying a PWM control signal to the ADJ pin to turn
the device on and off, giving an average output current proportional to the duty cycle of the
control signal. The ADJ pin can be driven directly from the open drain NMOS output of a
microcontroller, or indirectly with a low saturation voltage NPN transistor such as the Zetex
ZXTN25020DFL. (Fig 2).
Fig 2
In the circuit of Fig 4, the average LED output current will be
Where duty cycle
A PWM frequency of 200Hz, or lower is recommended, to minimize errors due to the rise and fall
times of the converter output.
ZXLD1320
ADJ
ZXTN25015DFL
D
nom
I
avg
I
LED
LED
*
)
(
)
(
=
)
2
1
(
2
T
T
T
D
+
=
Advertising