Diodes ZSM560 - Manual

Issue
4 - July 2006
© Zetex Semiconductors plc 2006
SUPPLY VOLTAGE
MONITOR
ISSUE
4 – JULY 2006
ZSM560
DEVICE DESCRIPTION
The ZSM560 is a three terminal under
v o l t a g e m o n i t o r c i r c u i t f o r u s e i n
microprocessor systems. The threshold
voltage of the device has been set to 4.6 volts
making it ideal for 5 volt circuits.
Included in the device is a precise voltage
reference and a comparator with built in
hysteresis to prevent erratic operation. The
ZSM560 features an open collector output
capable of sinking at least l0mA which only
requires a single external resistor to
interface to following circuits.
Operation of the device is guaranteed from
one volt upwards, from this level to the
device threshold voltage the output is held
low providing a power on reset function.
Should the supply voltage, once established,
at any time drop below the threshold level
then the output again will pull low.
The device is available in a TO92 package for
through hole applications as well as SOT223
for surface mount requirements.
FEATURES
•
SOT223 and TO92 packages
•
Power on reset generator
•
Automatic reset generation
•
Low standby current
•
Guaranteed operation from 1 volt
•
Wide supply voltage range
•
Internal clamp diode to discharge
delay capacitor
•
4.6 volt threshold for 5 volt logic
•
20mV hysteresis prevents erratic operation
APPLICATIONS
•
Microprocessor systems
•
Computers
•
Computer peripherals
•
Instrumentation
•
Automotive
•
Battery powered equipment
SCHEMATIC DIAGRAM
4-359