Diodes AH1809 User Manual
Ah1809, Description, Features
AH1809
Document number: DS35523 Rev. 3 - 2
1 of 13
February 2014
© Diodes Incorporated
AH1809
LOW SENSITIVITY MICROPOWER
OMNIPLOAR HALL-EFFECT SWITCH
Description
The AH1809 is a low sensitivity micro power Omnipolar Hall Effect
switch IC designed for battery powered consumer to home appliance
and industrial equipment such smart e-meters. Based on two Hall
Effect plates and a chopper stabilized architecture the AH1809
provides a reliable solution over the whole operating range. To
support battery and low power applications the design has been
optimized to operate over the supply range of 2.5V to 5.5V and
consumes only 24µW with a supply of 3V.
The single open drain output can be switched on with either a North
or South pole of sufficient strength. When the magnetic flux density
perpendicular to the package (B) is larger than operate point (Bop)
the output is switched on (pulled low). The output is turned off when B
becomes lower than the release point (Brp). The output will remain off
when there is no magnetic field.
The AH1809 is available in SC59, SOT553 and SIP-3L.
Features
•
Omnipolar (North or South pole) Operation
• Low
Sensitivity
•
Single Open Drain Output
• Micropower
Operation
•
2.5V to 5.5V Operating Range
•
Chopper Stabilized Design Provides
Superior Temperature Stability
Minimal Switch Point Drift
Enhanced Immunity to Stress
•
Good RF Noise Immunity
•
-40°C to +125°C Operating Temperature
• High
ESD
•
Small Low Profile SOT553 and Industry Standard SC59 and
SIP-3L Packages
•
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
•
Halogen and Antimony Free. “Green” Device (Note 3)
Pin Assignments
TOP View)
SC59
(TOP View)
SOT553
(TOP View)
1. V
DD
2. GND
3. OUTPUT
SIP-3L
Applications
• Smart
E-Meters
•
Tamper Protection Switch
•
Door, Lids and Tray Position Switch
•
Proximity and Position Switches
• Level
Detects
•
On/Off Switch Digital Contact-Less Switch in Industrial and
Consumer Products
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. S more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.