Diodes AH9249 - Manual (Page 7)

Data Sheet
High Sensitivity Micropower Omnipolar Hall-Effect Switch AH9249
Jul. 2011 Rev. 1. 6 BCD Semiconductor Manufacturing Limited
7
Test Conditions (Continued)
Figure 6. Output Saturation Voltage (Note 7, 8)
Note 7: The output saturation voltage V
SAT
is measured at V
CC
=2.5V and V
CC
=5.5V.
Note 8: The device is put under magnetic field with B>B
OP
.
Figure 7. Magnetic Thresholds (Note 9, 10)
Note 9: B
OP
is determined by putting the device under magnetic field swept from B
RP(min)
to B
OP(max)
until the
output is switched on.
Note 10: B
RP
is determined by putting the device under magnetic field swept from B
OP(max)
to B
RP(min)
until the
output is switched off.