Acer Veriton N2620G - Manual (Page 12)

12 | Getting Started
Diagnostics
If you are experiencing difficulty connecting to servers on certain
segments of your LAN, then you may want to use the ping command to
verify you are reaching specific servers and/or gateways on the subnet in
question. To use ping:
1. Select the Diagnostics tab from the Network Tools window.
2. In the Host Address field, type in the IP address or website you
want to test against and then press the Ping button.
3. If there is an error in the delivery to the destination, the ping
command displays an error message. Otherwise, replies will
continuously display for each packet successfully sent and
received.
4. Press the Stop button to terminate the ping loop.