Acer Veriton N2620G - Manual (Page 39)

Connections | 39
6
6
Connections
Adding New Connections
1 From the DeTOS Desktop, select DeTOSControl Panel.
2 Click the icon you wish to create; it is listed under the
Connections bar, on the left-hand side of the Control Panel.
3 The main window will split into two separate frames. The top
frame will list all existing connections for this particular type or
protocol. To add a new connection, click the plus [+] button.
4 You will be prompted to enter a name for this connection. Enter a
name for this connection and press the OK button to continue.
5 The bottom frame will display configuration fields that are specific
to the connection type you are creating. Some connections, like
Firefox Web Browser, will only have a couple of fields required for
configuration and be listed on a single form. Connections that
have several configuration options associated with them, like RDP
and Citrix, will have their settings grouped and sorted under
separate sections, called form panels. These panels can be
opened and closed by clicking the plus [+] and minus [-] buttons
found along the top, right-hand side of each panel box.
NOTE: The number of form panels will vary, depending on the type of connection
you are creating. Click the plus [+] or minus [-] buttons to expand and collapse
these sections.
6 Once you are finished setting up your connection, click the Apply
button along the bottom of the frame. An icon for the new session
will be created on the DeTOS Desktop. The end user can double-
click this icon to launch the connection.