Acer Veriton N2620G - Manual (Page 8)

8 | Getting Started
2
2
Getting Started
After the initial bootup, or when booting up after having selected the
Reset to Factory Settings, your thin client will ask if you wish to run as
a
Devon Zero™ client, or as a thin client console running DeTOS. If
running in
Devon Zero™ mode, see the section titled “Devon Zero™” in
the “Advanced Options” chapter to continue. If you chose to operate
your thin client using DeTOS instead, you will be shown the DeTOS
desktop and taskbar. To get started, do the following:

Check that your thin client is connected to the network.

If you have set up a management server in your network, check
that the thin client was able to contact the management server and
is in managed mode.

Create a desktop shortcut to allow thin client users to get
connected to a remote server. (See Chapter 6
, “Connections,” for
more information.)
To check the network connection status, click the DeTOS button and
then select Control Panel.