Initializing the raid volume, Assigning a hot spare disk, Save and exit lsi raid configuration utility – Acer Altos G540 M2 User Manual
Page 160
Appendix A: Server management tools
152
Initializing the RAID volume
1
Press Esc to return to the Management menu.
2
Select Initialize from the Management menu.
All logical drives should be listed under Logical Drives.
3
Press the space bar to select the drives for initialization.
The selected drive will be shown in yellow.
4
Press F10, then select YES to start the initialization process.
5
Once initialization is complete, press any key to continue.
6
Press Esc to return to the Management menu.
7
Press Esc, then select YES to close the configuration utility.
Press Ctrl+Alt+Del to reboot the system, then proceed to the OS
installation.
Assigning a Hot Spare Disk
1
Select Objects from Management menu.
2
Select Physical Drive from Objects. All of the HDDs will be listed.
3
Select a drive marked as READY and press Enter.
4
Select Make Hot Spare and press Enter.
5
Select Yes then you will see the HDD is changed from READY to
HOTSP.
6
Press ESC to return to the Management Menu.
Save and Exit LSI RAID Configuration Utility
1
When RAID configuration, initialization and assigning hot spare is
completed, press ESC in the Management Menu and select YES to
exit the RAID Configuration Utility.
2
Press Ctrl + Alt + Del to reboot the server.
3
Now you can start to install OS.