Acer Altos G540 M2 - Manual (Page 57)

47
4 Install the HDD cage.
(1) Slide the cage into the lower bay with the HDD carriers facing
front.
Then lock the cage by sliding the locker down as shown.
If you have installed a hot-plug HDD cage, proceed to next
step for related drive cable connections.
Drive cable connections for an easy-swap HDD can be found
on page page 58.
(2) Connect the following cables to the hot-plug HDD cage
backplane board.
(1) Connect the hard drive power cables to the CN1 and CN2
connectors of the backplane board.