Acer AR360 F1 - Manual (Page 44)

3 System upgrades 28
4 Place the system unit on a flat, stable surface.
5 Open the system according to the instructions on page 32
6 Follow the ESD precautions described in this section when
handling a server component.
Post-installation instructions
Perform the steps below after installing a server component.
1
See to it that all components are installed according to the
described step-by-step instructions.
2 Reinstall all components or cable that have been previously
removed.
3 Reinstall the top cover.
4 Reconnect the necessary cables.
5 Turn on the system.