Removing and installing an optical drive, Removing the 2.5” carrier cage, Removing an optical drive – Acer AR360 F1 User Manual
Page 53
37
3
Lock the HDD carrier.
Observe the post-installation instructions described on page 28
Removing the 2.5” Carrier Cage
1
Observe the ESD precautions described on page 27.
2
Observe the Pre-installation instructions on page 27.
3
Unplug the power and data cables from the cage drives.
4
Remove the four screws of the HDD cage (1).
5
Slide the HDD cage out of the system chassis (2).
6
Observe the post-installation instructions described on page 28.
Removing and installing an optical drive
The system supports a slim SATA optical drive.
Removing an optical drive
1
Observe the ESD precautions described on page 27.
2
Observe the Pre-installation instructions on page 27.
3
Unplug the power and data cables from the drive (1),(2).
4
Locate the locking tab at the rear of the drive.