Xylem 2000 Series Frame Mounted Pumps AC8652 REV.C User Manual
Page 17
17
6. Align the pump to the motor as instructed.
7. Connect the pump to the motor. Reinstall
the coupling guard and drain plugs. Close
drain valve.
8. Connect the power to the motor. CHECK
THE MOTOR ROTATION.
9. Open isolation valves, inspect pump for
leaks. If not le
turn pump to
service.
KED PUMPS:
gland nuts
ne
with the pump running. Allow
s
betw
djustments. Tightening the nuts too
quick
age to the packing and
sleeve. A good adjustment sho
w
approximately one (1) drip per second.
Se
g
gu
be
W
D
without all guards in place.
Failu
injury or
aking, re
NOTE FOR PAC
adjustment of the
Final
must be do
30 minute
een a
ly can cause dam
uld allo
This completes the assembly of the 2000
ries pump.
NOTE: All pumps are shipped with couplin
ards. Coupling guards must be in place
fore operating pump.
ARNING
o not operate
re to follow these instructions could result in
death.